TYPE SMW 02 LEVEL-LIMIT SWITCH

The SMW 02 is a microprocessor controlled level switch for liquids or pasty and adhesive substances.

• Empty and full notification in containers
• Substance monitoring in pipelines for pump protection
• Level detection of liquids in containers and pipelines

Features:

• Limit switch of the fill level for liquids DK>1
• Two switching outputs for various media e.g. Foam & Water / CIP & Product / etc.
• Teaching input for teaching the media
• Advanced settings, live process monitoring via PC and programming adapter (Optional)
• Welding socket system with modular process connections and pressure screw connection
• Defined position of the gland
• Aseptic measuring point
• Wetting parts made of peek
• Partly moulded
• EHEDG certified, FDA-conformal

Technical specifications:

• High-grade steel connecting head. Nr. 1,4305
• Electr. Connection: M16 screwing or M12 plug 5-pole
• Thread G 1/2” elastomer-free sealing system
• Sensor heads made of Peek (HPC-Tip No.5)
• Supply voltage 18…32 VDC
• Output signal 2 x PNP (standard), NPN or Push-Pull switchable NC / NO invertable via PC
• Permissible load, 0Ohm, 24VDC, 100mA
• Response timet < 0,3s
• ON / OFF delay 0..99.9 sec
• Ambient temperature -10…+70°C
• Medium temperature durable 0…+100°C (with neck pipe durable up top 150°C)
• CIP-/SIP cleaning 0… + 150°C (30 min)
• Storage temperature -20…+70°C
• Working pressure 10 bar max (Higher pressures on request)
• Protection IP68 / IP69K
• EMC radiation / immunity, EN 6132623 (in closed container)
• Torque max.: 20 Nm